Skip to content
Grok image
English
English简体中文繁體中文DeutschEspañolPortuguês

Doubao Seedream 5.0 Pro

A model detail page for one product in this catalogue. It records what the catalogue declares, what the publisher documents, and where the two do not agree.

Updated:

Doubao Seedream 5.0 Pro

Choose a mode, write the prompt, then read the quoted cost before you generate.

AI Image0

Generated content will appear here

Publisher’s own brief

Nine briefs the publisher published, in the language each was written in

Each of these is an image from the publisher’s own pages, shown with the prompt the publisher printed beside it. They are grouped here because they are the cases where a prompt was published in full: one Spanish brief, one Japanese brief, and the rest Chinese.

All nine images are the publisher’s own artwork, retrieved on 19 September 2026. Rights remain with the publisher; they are shown with source attribution and no claim of ownership. Every file arrived as published, so any marking it carries is the publisher’s and this site added none. Prompts are reproduced in the language the publisher wrote them in and are not translated, because a prompt is the model input and translating one would change the output. Two briefs among the publisher’s cases are published only in abbreviated form and are therefore not shown in this gallery; they appear among the cases below with captions that name no prompt.

A wide infographic about the Qinling research station in Antarctica: a photograph of the snow-covered station across the centre, a timeline of five Chinese Antarctic stations along the top, a bar chart of station sizes, a pie chart of energy mix, a line chart of monthly daylight, a table of summer weather readings and a seven-step fieldwork diagram. Details and published prompt ↗

01 / High-density infographic

An Antarctic research station turned into a data page

ByteDance Seed release blog ↗

Read the published prompt

主题为南极秦岭站科考纪事可视化信息图,中心放置秦岭站建筑主体;四周环绕排布科考发展时间轴、五座科考站规模柱状图、站点能源饼图、月度日照折线图,辅以科研设备实拍、夏季气象面板、野外作业七步流程、实地采样摄影,多方面展示中国南极科考实景。

Send this prompt to the workspace ↗

Copied from the publisher’s page, where this prompt is printed beside this image. The wording is unchanged, including its original language, because a prompt is a model input and rewriting one changes what it produces. The workspace on this page can accept it: the catalogue returns this product as available and priced.

A dark blue astronomy explainer about why the moon turns red during a total lunar eclipse. Three numbered panels show sunlight passing through the atmosphere, blue light being scattered away and the red light reaching the moon, with a large red moon on the left and a smaller red moon on the right. Details and published prompt ↗

02 / Explanatory infographic

Why a total lunar eclipse looks red

ByteDance Seed release blog ↗

Read the published prompt

生成一张天文科普信息图,解释:为什么月全食的月亮是红色的?

Send this prompt to the workspace ↗

Copied from the publisher’s page, where this prompt is printed beside this image. The wording is unchanged, including its original language, because a prompt is a model input and rewriting one changes what it produces. The workspace on this page can accept it: the catalogue returns this product as available and priced.

A pale green beginner birdwatching guide laid out in six numbered panels. Eight birds are illustrated in a grid with Chinese and Latin names and identifying marks, beside a four-season viewing calendar, an equipment checklist, a six-step technique strip, a labelled bird anatomy drawing and a set of facts. Details and published prompt ↗

03 / Grid layout with illustration and text

Eight garden birds in a six-panel field guide

ByteDance Seed release blog ↗

Read the published prompt

生成一张《新手观鸟入门指南》自然科普信息图,采用清新配色的网格排版,展示 8 种常见鸟类,并附带科学插画、中英文名、识别特征等内容。

Send this prompt to the workspace ↗

Copied from the publisher’s page, where this prompt is printed beside this image. The wording is unchanged, including its original language, because a prompt is a model input and rewriting one changes what it produces. The workspace on this page can accept it: the catalogue returns this product as available and priced.

An infographic explaining six tea families. A watercolour flavour wheel sits at the centre, ringed by overhead photographs of tea leaves at different oxidation levels, with connecting lines running out to an oxidation bar chart and a brewing temperature gauge, all on a textured handmade-paper background. Details and published prompt ↗

04 / Product-style infographic

Six tea families arranged around a tasting wheel

ByteDance Seed project page ↗

Read the published prompt

一张解释六大茶类的信息图。画面中心是一个风味轮图表,由细腻的水彩渐变构成。风味轮周围环绕着俯拍茶叶图像,呈现不同氧化程度的茶叶状态。连接线将茶叶与氧化百分比柱状图和冲泡温度温度计相连。背景为带纹理的手工宣纸。整体布局极简、禅意、精致,构图平衡。

Send this prompt to the workspace ↗

Copied from the publisher’s page, where this prompt is printed beside this image. The wording is unchanged, including its original language, because a prompt is a model input and rewriting one changes what it produces. The workspace on this page can accept it: the catalogue returns this product as available and priced.

A blueprint-style technical sheet for a futuristic sports car, drawn in grey line work on a pale background. Front, side and rear orthographic views are surrounded by exploded component drawings, assembly views and smaller thumbnails of parts seen from other angles, with dimension lines and measurements throughout. Details and published prompt ↗

05 / Technical drawing

A concept car drawn as a blueprint sheet

ByteDance Seed project page ↗

Read the published prompt

未来主义跑车的技术图纸,蓝图风格。跑车的正面、侧面、背面的线稿,拆解零件的稿图,零件拼接图,拆解零件的构造图,应使用大量线条和测量值来指示各个部位的尺寸,用灰度表达整体素描关系。除了主要设计外,还需展示不同角度的零散缩略图。

Send this prompt to the workspace ↗

Copied from the publisher’s page, where this prompt is printed beside this image. The wording is unchanged, including its original language, because a prompt is a model input and rewriting one changes what it produces. The workspace on this page can accept it: the catalogue returns this product as available and priced.

A dense role-playing game character screen in dark matte slate grey. A tall statistics panel sits on the left, a complex experience curve runs across the middle, and a large terrain minimap fills the right, with small gold accents and single-pixel grid lines separating every block of data. Details and published prompt ↗

06 / Interface layout

A game interface asked to hold a great deal at once

ByteDance Seed project page ↗

Read the published prompt

一个极其复杂、信息密度极高的 RPG 角色界面。画面中包含密集排列的角色属性栏、用于经验成长的复杂折线图,以及一个巨大的地形迷你地图。美学风格:高端工业功能主义。深哑光石板灰背景。清晰的白色等宽字体。克制的色彩,使用低饱和金色,用 1px 网格线分隔所有数据,细节极其丰富。

Send this prompt to the workspace ↗

Copied from the publisher’s page, where this prompt is printed beside this image. The wording is unchanged, including its original language, because a prompt is a model input and rewriting one changes what it produces. The workspace on this page can accept it: the catalogue returns this product as available and priced.

A large family seated around a dining table in a bright villa. Eleven people of different ages look towards the camera, plates and glassware cover the table, and a small timestamp reading 2009.06.21 sits in the lower right corner of the frame. Details and published prompt ↗

07 / Photographic realism

A family portrait with a date burned into the corner

ByteDance Seed project page ↗

Read the published prompt

为我生成一张照片,一家 11 口人在大别墅里围坐在一起吃饭,大家都看向镜头,右下角时间戳 2009.06.21

Send this prompt to the workspace ↗

Copied from the publisher’s page, where this prompt is printed beside this image. The wording is unchanged, including its original language, because a prompt is a model input and rewriting one changes what it produces. The workspace on this page can accept it: the catalogue returns this product as available and priced.

A vertical poster about the Mexican Day of the Dead in orange and violet. A three-tier altar fills the centre with marigolds, sugar skulls, candles and bread, framed by Spanish labels including Ofrenda, Velas and Pan de Muerto, with the phrase El amor nunca se olvida at the foot of the design. Details and published prompt ↗

08 / Multilingual output, Latin script with accents

The same poster brief, written in Spanish

ByteDance Seed project page ↗

Read the published prompt

Crea una infografía vertical 4:5 sobre la cultura del Día de los Muertos en México. Usa ilustraciones claras de altar, flores de cempasúchil, calaveras de azúcar, velas, pan de muerto y fotografías familiares.(制作一张关于墨西哥亡灵节文化的竖版 4:5 信息图。使用清晰的祭坛、万寿菊、糖骷髅、蜡烛、亡灵面包和家庭照片插画。)

Send this prompt to the workspace ↗

Copied from the publisher’s page, where this prompt is printed beside this image. The wording is unchanged, including its original language, because a prompt is a model input and rewriting one changes what it produces. The workspace on this page can accept it: the catalogue returns this product as available and priced.

A six-panel black and white manga page drawn in clean ink line work. A high-school boy plays basketball across the first panels, then speaks with a girl, and the final panels show him training and finally telling her how he feels. Details and published prompt ↗

09 / Multilingual output, Japanese script

A six-panel manga page, briefed in Japanese

ByteDance Seed project page ↗

Read the published prompt

日本の6コマ漫画で、バスケットボールが大好きな高校生男子が、ある女生徒に恋をし、努力と成長を経て想いを伝える青春ラブストーリー。白黒のみで、クリーンな手描きの墨線で描かれている。(一部日本 6 格漫画,讲述一名热爱篮球的高中男生爱上某位女生,并在努力与成长之后表达心意的青春爱情故事。画面仅使用黑白,以干净的手绘墨线绘制。)

Send this prompt to the workspace ↗

Copied from the publisher’s page, where this prompt is printed beside this image. The wording is unchanged, including its original language, because a prompt is a model input and rewriting one changes what it produces. The workspace on this page can accept it: the catalogue returns this product as available and priced.

A July 2026 model whose leading capability is not exposed here

ByteDance Seed published Seedream 5.0 Pro on 8 July 2026. The first capability in the publisher’s own list is layer decomposition, which was new in this version and lets one image be taken apart into a base layer plus up to sixteen separate layers. That control is not part of this catalogue’s form for the product.

The gap is not a matter of opinion about features. The publisher’s API reference for image generation lists thirteen body parameters. This site’s catalogue returns five form fields for the same product. Comparing the two lists is the single most useful thing a reader can do on this page, because four of the eight parameters that are missing are the ones that make this version different from the one before it.

This page therefore does two jobs. It describes what the product is, from the publisher’s own pages. It also records precisely which parts of that description the workspace on this site can reach today, and which parts it cannot.

The publisher count of thirteen is taken from the request-parameter list on the image-generation API page and counts the model field itself. The catalogue count of five is read from the live product record for site-19, whose form fields are prompt, image, size, response_format and watermark.

SurfaceParameters or fieldsIncludes layer decomposition
Publisher API reference, image generation, updated 9 September 202613 body parametersYes, boolean, default false
This catalogue, product doubao-seedream-5.0-pro, site-195 form fieldsNo

What the publisher says it does, under its own four headings

The release announcement organises the version into four claims rather than a feature list, and they are worth quoting as the publisher wrote them, because three of the four are about a single behaviour: holding a shape while something inside it changes.

Four capability names are quoted from the release blog. The publisher also states where the model is available at launch: the Volcano Ark experience centre immediately, with the Doubao and Jimeng apps to follow. Rolling out is the publisher’s own wording, not a statement that they are live.

  • Complex information visualisation: data, concepts and dense text turned into professional layouts, aimed at content with a high information density.
  • Interactive precise editing: point selection, lasso selection, sketch rendering, colour and material replacement, layer separation and multi-image fusion combined freely, described by the publisher as editing at pixel level.
  • Realistic photographic and portrait texture: light, material and skin grain, holding both computer-generated and photographic qualities.
  • Native multilingual input and generation: direct input and high-quality rendering in more than ten commonly used languages, carrying localised characteristics.

Thirteen parameters on one side of the table, five on the other

Listing both sets side by side is more useful than summarising the difference, because a reader who is deciding whether to use this product through this site needs to know which single control is absent, not that some are.

Two of the missing parameters are the ones that would change what a visitor could do rather than how the request is shaped. Layer decomposition is the version’s headline capability. Output format decides whether a layered result arrives as a transparent PNG, which is what makes a layer useful in a design tool at all.

The watermark parameter is present in both, but the defaults point in opposite directions. The publisher’s default is true and this catalogue exposes it as an unticked boolean, so the workspace and the API disagree about what happens when nobody touches the control.

Defaults are quoted from the publisher’s parameter table. The catalogue column records what the site-19 product record actually publishes, which was read on 19 September 2026. A parameter being absent from the form does not mean the underlying service rejects it; it means a visitor on this site cannot set it from the page.

Parameter in the publisher APIPublisher defaultPresent in this catalogue form
promptrequiredYes
imageoptional, single or listYes, capped at 10
layer_decompositionfalseNo
sizenot statedYes, as free text
optimize_prompt_optionsnot statedNo
output_formatjpegNo
backgroundopaqueNo
response_formaturlYes, as a url or base64 choice
sequential_image_generationdisabledNo
sequential_image_generation_optionsnot statedNo
streamfalseNo
toolsnot statedNo
watermarktrueYes, as a boolean
modelrequired, the model identifierSet by the workspace, not by the visitor

Pro is narrower than the cheaper tiers on four counts

The same API page documents Seedream 5.0 lite, 4.5 and 4.0 in a second block, and that block grants those models capabilities the Pro tier does not have. On this page’s evidence, paying more buys precision rather than breadth.

The publisher states the Pro limits as a flat list of things the model does not do: set generation, web search and streaming output are all named as unsupported, and sequential generation cannot be configured at all. The lite block directly above grants set generation, which makes the inversion explicit rather than inferred.

That matters for anyone comparing the tiers on price alone. A cheaper image model in this family can return a group of related images from one brief and this one cannot, so the Pro tier is the wrong choice for storyboard grids and the right one for holding a single complex frame together.

Both columns are the publisher’s own text, taken from the two capability blocks on one page. The page does not explain why the flagship is narrower, and this page does not guess.

BehaviourSeedream 5.0 ProSeedream 5.0 lite, 4.5 and 4.0
Images per reference set2 to 102 to 14
Set generationNot supportedSupported with sequential generation set to auto
Largest set from one briefOne image, since sets are unsupportedUp to 15 images, and reference count plus output count stays within 15
Web search during generationNot supportedAvailable on lite
Streaming outputNot supportedNot listed as unavailable

What a layer-decomposition call returns

The publisher publishes a worked example for this feature, and the response body is more informative than the feature description, because it shows the shape of a layered result rather than promising one.

The request sends one image, a set of coordinates marking the text blocks and the subject, the boolean turned on, and a size of 2K. The response comes back as an array rather than a single image: the base layer at index zero, a full two-thousand-and-forty-eight-pixel square, followed by the separated layers at increasing indices.

Each separated layer carries its own bounding box in both absolute pixels and normalised coordinates, a name and a short description, which is what makes a layer addressable later. The usage block reports one input image and eight generated images for the call, so a single brief produced nine files in total counting the base.

All six rows are read from the response example on the publisher’s image-generation API page. The example uses a size of 2K in the request and returns a base layer of 2048 by 2048, which is the clearest statement on the page of what 2K means for this model. The layer count in this one example is eight; the documented maximum is sixteen.

Field in the published responseValue in the publisher’s example
Base image size2048 by 2048, jpeg, index 0
First separated layer size1273 by 265, png, index 1
Bounding box, absolute pixels383, 120, 1655, 384
Bounding box, normalised187, 59, 808, 188
Layer name and descriptionThe masthead text, described as large yellow serif lettering
Usage for the callOne input image, eight generated images, 23107 output tokens

The size control a visitor actually sees

This is the part of the page that could only be established by reading the code and the live catalogue together, and it does not match what the model’s own configuration file says.

The workspace adds an aspect-ratio selector and a resolution selector from the local model table, but only when the catalogue has not already published a field of that kind. For this product the catalogue publishes size as a free-text field, so the aspect-ratio selector is never added; and it publishes no quality field, so the resolution selector is not added either. What a visitor sees is one empty text box labelled output size.

The local table is not silent on the subject. It declares a set of aspect ratios, three resolution options and a reference-image ceiling of fourteen. None of those three reaches the form, because each is superseded by what the catalogue publishes. The reference-image cap a visitor gets is ten, which is the catalogue figure and also the publisher’s stated maximum for multi-reference input.

Read from the live product record for site-19 and from the workspace code that merges catalogue fields with the local table. The rule the code applies is that a catalogue field wins and the local table only fills a gap the catalogue leaves. The consequence is worth stating plainly: on this page none of the three local declarations is in force.

ControlLocal model table saysCatalogue publishesWhat the form renders
Aspect ratioA named ratio list, default autoA size field, free textNo ratio selector; a text box
ResolutionThree options, default 2KNothingNo resolution selector
Reference imagesUp to 14Up to 10, at least 1Up to 10

What the publisher says the model still gets wrong

The release announcement ends with a limitation the publisher wrote itself, and it is more specific than the usual forward-looking closing paragraph.

The limitation is the publisher’s own sentence. The timing and pricing figures are third-party and are reported as claims rather than facts: this page has not measured latency and cannot quote a resale price, because the publisher does not set one. Where two sources disagree the disagreement is the finding, and neither figure is presented here as the true one.

  • The publisher states that the model has made progress on complex infographics and interactive editing but that finer-grained text rendering and pixel-level edit retention still have room to improve.
  • A third-party review measured sixteen panels and found the model’s long-form body copy less reliable than its headline text, while noting it held factual detail in a geographic test that a rival model did not.
  • Two reviewers publish generation times that differ by more than an order of magnitude. One states about two seconds per image; another measured between twenty-six and eighty seconds with a median of fifty-two, describing this model as the slowest in its batch.
  • The same reviewers disagree about the cost of access, quoting two different per-image prices from the same third-party host.

The artwork on this page, and what it cannot show

Every image here comes from the publisher, and every one was opened and looked at before it was used. Nothing on this page is a user submission, a competitor render or a synthetic placeholder.

Screening was visual and per file, not by thumbnail. No kept image carries a visible AI label, a publisher watermark, a third-party wordmark or another site’s logo. The magazine masthead and the can marking in the ten-language poster are the publisher’s own brand.

  • Thirty images are used, all from the publisher’s release blog and project page. Six of them are before-and-after pairs, used as the comparison cases above, because the publisher publishes those edits as two separate files rather than one combined panel.
  • The prompts are reproduced in the language the publisher wrote them in, which for this model is mostly Chinese, with one Spanish brief and one Japanese brief. They are not translated. A prompt is the model’s input, and rewriting one into another language produces a different image rather than a translation of the same image.
  • The publisher publishes five demonstration clips alongside these stills, including a two-hundred-and-fifty-megabyte layer-separation clip. None is embedded here. The page is a stills gallery and embedding it would not add a case that the stills do not already carry.
  • Where the publisher publishes a long prompt only in abbreviated form, this page does not quote one at all. That is why two case captions above describe their image without a prompt: the publisher cuts those briefs off with a note saying how many characters were omitted, and quoting half a prompt as though it were one is worse than quoting none.

Examples

Before

Before: Two views of the same living room. On the left the room is photographed as it is, overlaid with purple rectangles and handwritten English notes marking objects to change. On the right the same room is rebuilt in a warmer, brighter and more even light with those marks gone.

After

After: Two views of the same living room. On the left the room is photographed as it is, overlaid with purple rectangles and handwritten English notes marking objects to change. On the right the same room is rebuilt in a warmer, brighter and more even light with those marks gone.

The clearest single demonstration of what the publisher means by interactive editing. The input carries six purple boxes and handwritten English notes; the output keeps the layout, the furniture positions and the window light direction while restyling everything the notes touch. The interest is that the marks are spatial rather than verbal, which is the distinction the publisher draws between saying what to generate and saying where to change it.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

Before

Before: A desert scene before and after editing. On the left a real-looking lizard stands on sand beside rocks with annotation marks drawn over the frame. On the right the same animal has become a crystalline dragon of the same size and stance, still standing on the same sand under the same light.

After

After: A desert scene before and after editing. On the left a real-looking lizard stands on sand beside rocks with annotation marks drawn over the frame. On the right the same animal has become a crystalline dragon of the same size and stance, still standing on the same sand under the same light.

An edit that changes what the subject is rather than how it looks. The publisher brief was to evolve the lizard into a crystal dragon while keeping the creature plausible, and the output holds the original silhouette, footprint and shadow while replacing the surface with faceted crystal. Keeping the animal anatomy is the part that is easy to get wrong, and the caption on the publisher page says so.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

Before

Before: A European street scene before and after editing. On the left it is daylight, with a black car circled in red and other annotations over the buildings. On the right the same street is a wet night scene with the car in motion, wet asphalt reflecting the lights, and cinematic wide-screen framing.

After

After: A European street scene before and after editing. On the left it is daylight, with a black car circled in red and other annotations over the buildings. On the right the same street is a wet night scene with the car in motion, wet asphalt reflecting the lights, and cinematic wide-screen framing.

The brief asked for the whole frame to be reconstructed as a night chase scene rather than for a single object to be swapped, so the colour, the weather, the time of day and the depth of field all move together. It is the case on this page where the gap between the input and the output is widest, and it is the reason the publisher lists the capability as reconstruction rather than retouching.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

Before

Before: A hand-drawn interface sketch before and after editing. On the left a rough pencil wireframe with coloured boxes and handwritten labels sits on textured paper. On the right it has become a finished software marketing page with a headline reading Orchestrate AI Workflows at Scale, illustration panels and a navigation bar, keeping the sketch layout.

After

After: A hand-drawn interface sketch before and after editing. On the left a rough pencil wireframe with coloured boxes and handwritten labels sits on textured paper. On the right it has become a finished software marketing page with a headline reading Orchestrate AI Workflows at Scale, illustration panels and a navigation bar, keeping the sketch layout.

A sketch-to-interface conversion with an explicit instruction to preserve the layout. The value for a reader is the constraint rather than the picture, because holding a rough layout while filling it with finished components is the part that usually drifts; the brief names the headline text exactly and asks for the structure to stay put.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

Before

Before: Two women on a tennis court before and after editing. On the left both wear sportswear with natural hair and light makeup. On the right both are restyled with pulled-back glossy hair and heavier fashion-show makeup, while their poses, the court and the light are unchanged.

After

After: Two women on a tennis court before and after editing. On the left both wear sportswear with natural hair and light makeup. On the right both are restyled with pulled-back glossy hair and heavier fashion-show makeup, while their poses, the court and the light are unchanged.

A restyling case where the elements being changed are small in area but carry most of the meaning. Changing hair and makeup without moving the faces, the bodies or the court is a tighter task than it looks, and it is the same class of edit as the portrait-touch-up case the publisher also publishes.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

Before

Before: The same medical clinic poster in two languages. On the left the interface is in English, headed Family Health Clinic, with a photograph of a doctor and a family and a grid of service cards. On the right the layout, image, colour and card grid are identical but every label is in Arabic and the whole column reads right to left.

After

After: The same medical clinic poster in two languages. On the left the interface is in English, headed Family Health Clinic, with a photograph of a doctor and a family and a grid of service cards. On the right the layout, image, colour and card grid are identical but every label is in Arabic and the whole column reads right to left.

The right-to-left case. Nothing is redesigned: the colour, the icons, the photograph and the module structure are held, and the text is translated and the reading direction is mirrored. The publisher treats this as a separate claim from generating text in many languages, because reversed reading order is a layout problem rather than a vocabulary problem.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

A magazine cover titled Seedream with the cover lines Wild Beauty, Ten Fun Facts and Tropical Splendour, built around a scarlet macaw against a dark teal background, with a barcode block in the lower right.

A cover composition that has to hold a masthead, three cover lines, a subject and a barcode without any of them colliding. It is included because a magazine cover is the layout most likely to expose a text renderer: the masthead is large, the cover lines are small, and both sit over a busy photographic subject.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

A tall restaurant menu headed Italian Kitchen with a Starters section listing caprese salad, bruschetta and soup of the day, a Pasta section with spaghetti alla carbonara, penne arrabiata and pizza margherita, a Desserts section with tiramisu and panna cotta, each with an English description and a price in euros.

A menu is a test of two things at once: does the layout survive an odd page proportion, and does every price land beside the dish it belongs to. The publisher publishes this one in English while the Thai menu case on the same page is published in Chinese, so the pair shows the same house style in two scripts.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

A vertical rail platform safety poster on a yellow and white background with black pictograms in five rows: hold the handrail and never lean on the platform doors, let passengers exit first and do not force the doors, keep an eye on children, and stand behind the yellow line. The heading Platform Safety Guide and every instruction appear in Chinese, English, Japanese and Korean side by side.

Four languages in one poster, which is the densest multilingual case on the page. The interest is that the same four instructions have to fit the same column width in Chinese, English, Japanese and Korean at once, so the layout cannot be tuned for one language and quietly broken in the other three.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

A pale green infographic headed Lower Your Carbon Footprint. A row of figures walks across the top beside a train, a tree and a skyline, a set of numbered steps runs down the left, and two overlapping circles map transport, home, food and shopping. A four-icon strip along the bottom covers bike rides, car trips, recycling and tree planting.

An infographic about a subject with numbers that can be checked, which makes it the most falsifiable image on the page. Every figure, unit and percentage in a diagram like this is a place where a generator can be plausibly wrong, and the publisher does not claim otherwise.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

A tall light green poster about a green apple cider. Bottles and sliced apples are laid out down the centre with small printed panels of text above and below them, and a band of green apples runs across the lower third.

A product page built almost entirely from a single repeated object: bottle, apple, leaf, repeated at several scales down the page. It is the case where a generator most often loses count or changes the object between repetitions, so it is included as a shape that is easy to read at a glance.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

Two trail runners crossing a muddy mountain path in wet weather, seen from behind and to the side. Splashes of mud and water rise from their shoes, low cloud sits on the ridges behind them, and the colour is muted grey and olive.

A wide action frame rather than a portrait. The interest is the water: droplets caught mid-flight, mud thrown up behind the shoes and rain on the ground all have to agree with one light source, which is the kind of physical consistency that studio-lit product shots do not test.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

Ten versions of one beverage poster arranged in two rows of five. Each shows the same can and the same splashing drink against a blue sky, and each carries a different headline in a different script: Chinese, English, Spanish, Arabic, French, German, Tagalog, Indonesian, Malay and Turkish.

The publisher publishes ten language versions of one layout as a single image, which is the most direct evidence on this page for the multilingual claim. Ten scripts is fewer than the dozen-plus languages the publisher claims elsewhere, and the image shows the ones chosen for display rather than the full supported set.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

A tall education poster headed What is Montessori Education, aimed at parents. A warm cream and sage palette carries a titled section, a photograph of a classroom, a set of numbered principles, a two-column comparison of what Montessori is and is not, and a closing line about how children learn and develop.

A nine-by-sixteen education poster with more text than artwork. The publisher publishes this brief with an abbreviated prompt, so this caption does not quote one; the image is included for its shape, since a tall poster with several headed blocks is a different test from a single wide frame.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

A four-by-four storyboard grid of sixteen numbered panels in graphite pencil on light grey. The panels show a medieval cavalry charge in sequence, reading left to right and top to bottom, with a small number in the top left corner of each panel.

Sixteen panels in one frame, each numbered and each part of a sequence, which is the strictest layout constraint on this page. The publisher publishes this brief with an abbreviated prompt, so the caption quotes no prompt; the image is included because panel-to-panel continuity in a grid is a different problem from making one strong picture.

ByteDance Seed, Seedream 5.0 Pro project page, retrieved 19 September 2026. The publisher published this image with the prompt shown beside it. · Third-party material. Rights remain with the publisher; shown with source attribution and no claim of ownership.

Questions

Does this page publish a price for Seedream 5.0 Pro?

It publishes the catalogue figure and nothing else. The site-19 catalogue returns seven points per image as a fixed unit price across all three task types, shown as a single rate rather than a range. That is the number the workspace quotes from. The page does not convert it into a currency and does not publish any third-party rate, because resale prices change and are not set by the publisher.

Can I actually generate an image with this model from this page?

Yes. The catalogue returns this product as available, with all three task types callable and priced, so the workspace can send a task. It pins the model when the page opens so nothing else has to be selected. This differs from some other model pages on this site, where the catalogue marks the product temporarily unavailable and the form renders but every mode is inert.

Why is there no aspect-ratio or resolution selector in the workspace?

Because the catalogue publishes a size field for this product and no quality field. The workspace only adds its own ratio and resolution selectors when the catalogue has left that kind of field out, and here it has not, so both additions are skipped and a single free-text size box is shown instead. The local model table does declare a ratio list and three resolution options, but neither reaches the form.

What is layer decomposition, and can I use it here?

It is the publisher’s feature for taking one image apart into a base layer plus up to sixteen separate layers, each with its own bounding box, name and description, so the pieces can be moved independently. The publisher documents a boolean parameter that switches it on. That parameter is not among the five fields this catalogue publishes, so it cannot be set from this page, and this is the clearest example on the page of a documented capability that the workspace does not reach.

How many reference images can I send?

Up to ten, and at least one. The catalogue publishes a reference-image limit of ten and the publisher states a range of two to ten for multi-reference generation, with a separate single-reference path that takes one image. The workspace uses the catalogue figure, so it accepts up to ten even in the modes where the publisher describes a two-image floor.

Does it return a set of related images from one brief?

No. The publisher names set generation as unsupported on this model and says the set-generation parameter cannot be configured at all. The same page grants set generation to Seedream 5.0 lite, 4.5 and 4.0, which can return up to fifteen related images with a reference-image count and an output count that together stay within fifteen. For storyboard grids and variants, the cheaper tiers in this family are the ones that can do it.

What is the largest image it can produce?

Two thousand and forty-eight pixels on a side, which the publisher calls 2K. The worked response example uses a 2K request and returns a base layer of 2048 by 2048. Nothing on the page documents 4K support, and although the local model table lists a 4K option, that list does not reach the workspace form, so the option is not offered to a visitor here.

Why are the prompts on this page not translated into other languages?

Because they are model inputs. The publisher wrote most of these briefs in Chinese, one in Spanish and one in Japanese, and each was written for the script it uses; the multilingual cases depend on the language of the brief. A prompt is the exact text that produced the image, so translating it would replace evidence with paraphrase. Each language version of this page therefore shows the same prompts in their original wording.

Explore next